Mfg: Johnford
Model: DMC-2600 SH
YOM: 2017
Travels:
Longitudinal Travel X-Axis: 102"
Cross Travel Y-Axis: 70"
Vertical Travel: Z-Axis: 31.5"
Table to Spindle: 5.9" Min / 37.4 Max.
Distance Between Columns: 72"
Table:
Table Work Surface: 106.2" x 59"
Max. Workload on Table: 22,000lbs.
Table Surface: Ground / T-Slotted (No. of T-Slots x width) 10 x 18mm
Spindle:
Spindle Motor: 35 HP
Spindle Torque: 575 ft/lbs. at only 375 RPM
Spindle Taper: ISO-50
Spindle Drive System: 2-Speed Gear Box
Spindle Speed: 0-6,000
Automatic Tool Changer:
Number of Tools 40 tools (60, 80, 120 opt.)
Tool Selection Bi-directional-random
Tool Change Time 12 sec tool to tool
Maximum Tool Diameter 5.3" with adjacent tools, 7.8” without
Maximum Tool Weight 33 LBS
Tool Type CAT-50 (BT-50 opt)
Maximum Tool Length
Ballscrews & Axis Motors
Ballscrews and Axis Motors
X-Y-Z Ballscrew Diameter: 2.5” X, 2.5” Y, 1.97”Z x 10 pitch
Ballscrew Type: Class 3 double nut pre-loaded
Ballscrew Mounting Type: Pre-tensioned
X-Y-Z Servo Motor HP: 9.0 - 9.0 – 9.0HP
Servo Motor Mounting: Direct coupled XYZ
Feeds
Rapid Traverse Rate X,Y,Z 472 IPM
Cutting Feed Rate 0.01 - 394 IPM
Positioning Accuracy +/- .0003" full stroke
Repeatability +/- .0002"
Brand
JOHNFORD
Type
Machining Centers, Gantry (incld. Bridge & Double Column)
Stock No.
22140
 |
419-269-2000 |
Stock #: 22140
Mfg: Johnford
Model: DMC-2600 SH
YOM: 2017
Travels:
Longitudinal Travel X-Axis: 102"
Cross Travel Y-Axis: 70"
Vertical Travel: Z-Axis: 31.5"
Table to Spindle: 5.9" Min / 37.4 Max.
Distance Between Columns: 72"
Table:
Table Work Surface: 106.2" x 59"
Max. Workload on Table: 22,000lbs.
Table Surface: Ground / T-Slotted (No. of T-Slots x width) 10 x 18mm
Spindle:
Spindle Motor: 35 HP
Spindle Torque: 575 ft/lbs. at only 375 RPM
Spindle Taper: ISO-50
Spindle Drive System: 2-Speed Gear Box
Spindle Speed: 0-6,000
Automatic Tool Changer:
Number of Tools 40 tools (60, 80, 120 opt.)
Tool Selection Bi-directional-random
Tool Change Time 12 sec tool to tool
Maximum Tool Diameter 5.3" with adjacent tools, 7.8” without
Maximum Tool Weight 33 LBS
Tool Type CAT-50 (BT-50 opt)
Maximum Tool Length
Ballscrews & Axis Motors
Ballscrews and Axis Motors
X-Y-Z Ballscrew Diameter: 2.5” X, 2.5” Y, 1.97”Z x 10 pitch
Ballscrew Type: Class 3 double nut pre-loaded
Ballscrew Mounting Type: Pre-tensioned
X-Y-Z Servo Motor HP: 9.0 - 9.0 – 9.0HP
Servo Motor Mounting: Direct coupled XYZ
Feeds
Rapid Traverse Rate X,Y,Z 472 IPM
Cutting Feed Rate 0.01 - 394 IPM
Positioning Accuracy +/- .0003" full stroke
Repeatability +/- .0002"
